|Place of Origin:||Zhejiang,China|
|Brand Name:||Hnx waterproof cable gland|
|Certification:||RoHS, ISO, CE, IP68,REACH|
|Model Number:||PG Type|
|Minimum Order Quantity:||10 Pieces|
|Delivery Time:||3-30 Day|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Supply Ability:||30000 Pieces/Day|
|Material:||SS304 / SS316L||Antimagnetic Parts:||Explosion Proof|
|Max Temperature:||120 ℃||Performance:||Watertight|
|Surface Treatment:||Electroplating||Model NO.:||PG7-PG63|
ss cable gland,
steel cable gland
Resist Salt NPT / G Stainless Steel Cable Gland For Outdoor / Indoor
1. specifications for conventional German thread PG
2. the main material is stainless steel SS304/316L
3. the clamping part is nylon plastic PA66, UL94-V2
4. waterproofing ring and seals are nitrile rubber and silicone rubber.
European CE, ROHS,REACH certification
1. precision thread, tightly connected
2. seal rubber ring, effective seal
3.protection degree up to IP68
Special clamping claws and clamping rings are sealed and fastened together with the tightening nut, thus clamping the cable in a large range.
Strong tensile strength, waterproof, dustproof, salt - resistant, acid and alkali - resistant, alcohol, oil, ester and other common solvents.
Application occasions: offshore operations, mine machinery, chemical equipment and other harsh working occasions.
conductor connection conductor connection requires low resistance and sufficient mechanical strength, and no sharp corners can be found at the junction. The middle and low voltage cable conductor connection is usually pressed.
(1) choose suitable conductor and connecting tube with electrical conductivity and mechanical strength;
(2) the gap between the inner diameter of the pressure pipe and the outer diameter of the connecting core is 0.8~1.4mm.
(3) the resistance value of the joint after crimping shall not be 1.2 times higher than that of the equal section conductor, and the tensile strength of the copper conductor joint shall not be less than 60N/mm2;
(4) before crimping, the outer surface of the conductor is coated with conductive adhesive on the inner surface of the connecting pipe, and the oxide film is destroyed by a wire brush.
(5) sharp corners and burrs on connecting pipes and conductor conductors, smoothing with files or sandpaper.
Q: Are you trading company or manufacturer?
A: We are the factory. Also we can export the goods by ourselves.
Q: How long is your delivery time?
A: Generally we can send out the the goods within 3-7 days if the goods are in stock.
Or it is should be 7-30 days if the goods are not in stock, it is according to your order quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the samples for free charge but do not pay the cost of freight.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance,
balance before shipment.
Q: How about the after-sale service?
A: Any feedback or comments are welcomed.
We will try to make the best assistant to let you maximum satisfaction.
Contact Person: IDa