Metal Washer EMC Cable Gland EMC Locknut Power Cable Gland For Electrical Box

Metal Washer EMC Cable Gland With EMC Locknut For Electrical Box

The EMC cable gland is suitable for high voltage places such as electric boxes and transformers. The following is a description of EMC cable gland:

1. European CE certification and European ROHS certification

2. M/PG/G/NPT

3. cable gland is made of nickel-plated brass, the clamping part is made of nylon plastic (PA), and the seal and O seal ring are made of NBR.

4. in the scope of the specified bayonet, and use the O-ring to tighten the pressing head to achieve the IP68-10 bar pressure.

5. static: -40 ℃ to 100 ℃, short time to 120 ℃. Dynamic: -20 ℃ to 80 ℃, a short time of 100 degrees centigrade

6. thread length: for thin machine plate openings or equipment with internal thread, long thread is suitable for joining thick plank. Thread lengthening can be customizable.

7. product characteristics: the product is specially designed to use the metal cable fixed head as an end body. When the isolating cable enters the fixed head, the attached copper contact sheet can be used to contact the wire mesh in the cable to guide the interference electromagnetic wave to the grounding wire, so as to make the electromagnetic wave. The source of interference is evacuated. The full dimension of the copper cable fixed head can be fully applied to all fields of magnetic wave protection and provides a solid effect of waterproof IP68 and fixed tensile.

Usage method

• Metal cable waterproof gland is the accessory of cable. The products are widely used in oil, chemical, machinery, nuclear power, shipbuilding, paper, pharmaceutical, food, aerospace and other fields.
• The gland can lock the cable, and the other end can be connected to the upper part of the equipment box, or screw thread can also be selected.
• Access to the import and export of the internal thread on the electric equipment. General mechanical control box, distribution plate, machine.
• Wire and cable fixed, can effectively clamp the cable and achieve the purpose of waterproofing.
• The main function is to make the line unobstructed, to keep the cable sealed, and to ensure the insulation level of the cable gland to ensure its safe and reliable operation. If the sealing is bad, not only will the oil leakage cause the drying of the oil impregnated paper, but also the moisture will intrude into the cable, causing the insulation performance of the paper to decrease.

Product Introduction

Our cable gland has a wide range of uses, which can be used to connect the LED lamp line interface, the laying of the circuit cable, the connection of the electric box cable; it can also be used in the cable connection of the manufacturing industry equipment, the line connection of the robot industry, the connection of the charging pile line, and the application in the new industries such as wind energy and solar energy. The cable connector has corrosion resistance and can be applied to marine operations, chemical equipment and so on.