Breathable Brass Metal Screw Vent Plugs Valve For LED Lighting Equipment

Breathable Brass Metal Screw Vent Plugs Valve For LED Lighting Equipment

Material: stainless steel / copper nickel plating / aluminum / nylon PA6

Color: Grey / White / black, etc, customizable

Temperature: -40 C to 120 C, a short time of 150 degrees centigrade

Air flow: 325 ml / min (0.07)

Mechanical properties:

• uniquelimit design, can prevent O-ring overflow;
• The waterproof grade reaches IP68, and the waterproof depth reaches 3M-5M
• Special design can reduce residual water after rain, so as to avoid long time soaking breathable membrane.
• The riveting pressure top cover can avoid falling off.
• The thread designed according to the national standard can adapt to the installation of standard parts. 

It also has stable chemical properties, UV resistance and good weatherability. It can be applied to outdoor electronic equipment with high calorific value and high air pressure.

Performance:

1: Waterproof,dustproof

2: Vent,copper factory and protect equipment operating under terrible environment.

3: Cooling,replace or assist heat sink,to reduce temperature of car.

4: Extend the service life of products.

Mainly function:
*Quick recovery of air after contact with liquid

*The high permeability can balance the internal and external pressure,thus reducing the stress of the casing seal
*The protective film of water-repellent oil structure is embedded in the stainless steel shell,which has the characteristics of inertia, uniformity, chemical resistance and anti-ultraviolet radiation
*MICROPOROUS structure
*Moisture and moisture permeability
*The threaded housing is fitted with a fluorine sealing ring

Main benefit:
*Protect sensitive electronic components
*Reduce cover design and manufacturing cost
*Long service life and free maintenance in extreme environment
*It greatly reduces the electrical and inductive product failures caused by salt corrosion
*Greatly reduce the fog and dew
*Easy installation and installation
*Can make the sealing box have better cooling effect

Production introduction:

Metal hose connector is a high-quality flexible pipe in modern industrial pipelines.

It mainly consists of corrugated pipe, net sleeve and joint.

Its inner pipe is a thin-walled stainless steel corrugated pipe with spiral or annular shape,

and the net cover of the outer layer of the corrugated pipe is woven by stainless steel wire

or steel strip according to certain parameters. The connectors or flanges at both ends of the hose

are matched with the connectors or flanges of the customer's pipe.

The bellows of the hose is made of extremely thin-walled seamless

or multi-welded stainless steel pipe through high precision plastic processing.

Due to the elastic characteristics of the bellows profile,

the hose has good flexibility and fatigue resistance,

which makes it easy to absorb various cyclic loads of movement and deformation,

especially in the pipeline system, it has the ability to compensate for large displacement.

Application scope:

Outdoor lighting, automobile, communication equipment,sports equipment precision electronic equipment, security, solar pv and other industries.