|Place of Origin:||Zhejiang,China|
|Brand Name:||Hnx waterproof cable gland|
|Certification:||RoHS, ISO, CE, IP68,REACH|
|Model Number:||PG Type|
|Minimum Order Quantity:||10 Pieces|
|Delivery Time:||3-30 Day|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Supply Ability:||30000 Pieces/Day|
|Material:||SS304 / SS316L||Antimagnetic Parts:||Explosion Proof|
|Max Temperature:||120 ℃||Performance:||Watertight|
|Surface Treatment:||Electroplating||Model NO.:||PG7-PG63|
ss cable gland,
steel cable gland
Outdoor Dustproof Stainless Steel Cable Gland With IP68 Waterproof Level
Product Descrption of the cable gland
Δ Material: Adopting nylon PA66 certificated by UL
Δ Weather strip: Nitrile butadiene rybber(NBR), Weathering-resistance rubber(EPDM)
Δ Working temperature: -40 °C to 100 °C in static state, instantaneous heat resistance up to 120 °C;-20 °C to 80°C in dynamic state, instantaneous heat resistance up to 100 °C
Δ Characteristics: IP68(Rotate the part, and use O ring)
Δ Color: Black(RAL9005), light grey(RAL7035), as well as special colors that can be designed at request
Δ Thread length: Standard thread type is used for the equipment which has inner thread or for the board.Longer thread type is used for the thick board.
Δ Function: Extremely easy installation, simply insert cable through the assembled gland and tighten gland locknut until cable is secured. These products are designed to withstand water, dust, salt,acid-base, alcohol, oil and common solvent.
conductor connection conductor connection requires low resistance and sufficient mechanical strength, and no sharp corners can be found at the junction. The middle and low voltage cable conductor connection is usually pressed.
(1) choose suitable conductor and connecting tube with electrical conductivity and mechanical strength;
(2) the gap between the inner diameter of the pressure pipe and the outer diameter of the connecting core is 0.8~1.4mm.
(3) the resistance value of the joint after crimping shall not be 1.2 times higher than that of the equal section conductor, and the tensile strength of the copper conductor joint shall not be less than 60N/mm2;
(4) before crimping, the outer surface of the conductor is coated with conductive adhesive on the inner surface of the connecting pipe, and the oxide film is destroyed by a wire brush.
(5) sharp corners and burrs on connecting pipes and conductor conductors, smoothing with files or sandpaper.
Q: Are you trading company or manufacturer?
A: We are the factory. Also we can export the goods by ourselves.
Q: How long is your delivery time?
A: Generally we can send out the the goods within 3-7 days if the goods are in stock.
Or it is should be 7-30 days if the goods are not in stock, it is according to your order quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the samples for free charge but do not pay the cost of freight.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance,
balance before shipment.
Q: How about the after-sale service?
A: Any feedback or comments are welcomed.
We will try to make the best assistant to let you maximum satisfaction.
Contact Person: IDa