M30 Customized Metal Strain Relief Cable Gland Connetor With Spiral Tail

M30 Customized Meatl Strain Relief Cable Gland With Spiral Tail

The exterior material is PA66 and the interior core sleeve is nylon flame retardant UL94-V2. Its main function is to make the line unobstructed, keep the cable sealed, and ensure the insulation level of the cable cable gland, so that it can operate safely and reliably. If the sealing is bad, not only will the oil leakage cause the drying of the oil impregnated paper, but also the moisture will intrude into the cable, causing the insulation performance of the paper to decrease. The unique groove design avoids direct contact between the thread and the O ring, prevents abrasion and achieves better sealing effect.

Product Description

• With the common product, a twisted twist structure is added to the structure of anti loosening and tight nut structure with high torsion resistance, so that the product is resistant to tension, torque resistance is very strong, and the air tightness is perfect. It is especially suitable for hand-held and mobile devices to prevent cable sprains. At the same time, the products have corrosion resistance to acid, alkali, chemicals and general solvents.

Protection level

• In the range of the specified bayonet, the O type seal ring is used to tighten the fastening head to reach the IP68. working temperature of -40 ℃ to 100 ℃.

Usage

• Nylon cable waterproof connector is a supporting article for cables, which is mainly used in distribution boxes and distribution cabinets.
• The connector can lock the cable, and the other end can be connected to the upper part of the equipment box body, or can be threaded according to the selection.
• Connect to electric equipment with internal threads at the inlet and outlet. General machinery control box, distribution board, machinery.
• When used for fixing wires and cables, it can effectively clamp cables and achieve the purpose of waterproof.
• According to the installation materials produced, they can be divided into heat shrink type ( the most commonly used type ), dry wrap type, epoxy resin pouring type and cold shrink type.
• According to the core material, it can be divided into copper core power cable connector and aluminum core power cable connector.
• The main function is to keep the line unobstructed, keep the cable sealed, and ensure the insulation grade at the cable joint, so as to ensure its safe and reliable operation. If the seal is not good, it will not only cause the oil-immersed paper to dry up due to oil leakage, but also moisture will invade the inside of the cable, which will reduce the insulation performance of the paper.

Company advantages

• Specializing in the production of cable connectors for 12 years, we specializes in R & D and launch various new products, and have many patented products.
• Automatic production of numerical control equipment, accurate and safe
• 2011 years become Liaoning "aircraft carrier" special waterproof connector supplier