TJ Clamping Type Watertight Cable Glands Marine For Stuffing Box

TJ Clamping Type Watertight Cable Glands Marine For Stuffing Box

Product:Clamping Type cable gland

Structure:sealing nut, washer, seal, body, O-ring and lock nut

The sealing nut, body and lock nut made by nickel-plated brass, the O-ring and seal made by NBR, silicone rubber, the metal washer made by nickel-plated hoop.

Working temperature: static: -40 degrees C to 110 degrees centigrade, up to 120 degrees C.

Dynamic: -20 degrees C to 80 degrees C, up to 100 degrees centigrade.

Applications: instrumentation, ships, machinery, electrical, transportation, medicine, oil fields and other cable fixed.

Note: the cable gland can be specially customized according to the actual needs of the customer.

Product characteristics

1. selection of top copper material, exquisite workmanship

The metal part is made of high quality brass, and the outer layer is made of environmental protection electroplating nickel. The waterproof grade reaches IP68. All the seals are made of new high quality rubber new material. The quality is excellent and the work is exquisite.

2. composite inner core structure has stronger waterproof performance

The long inner core has stronger insulation ability, protection cable line, professional waterproof grade, new high quality nylon raw material, special clamping claw design, waterproof, dustproof, anti aging, acid alkali, alcohol and general solvent

3. high quality metal, sturdy and durable

High end appearance design, simple and beautiful appearance, with high quality metal shell protection, durable and durable life, suitable for indoor and outdoor environment.

Installation attention
conductor connection conductor connection requires low resistance and sufficient mechanical strength, and no sharp corners can be found at the junction. The middle and low voltage cable conductor connection is usually pressed.
(1) choose suitable conductor and connecting tube with electrical conductivity and mechanical strength;
(2) the gap between the inner diameter of the pressure pipe and the outer diameter of the connecting core is 0.8~1.4mm.
(3) the resistance value of the joint after crimping shall not be 1.2 times higher than that of the equal section conductor, and the tensile strength of the copper conductor joint shall not be less than 60N/mm2;
(4) before crimping, the outer surface of the conductor is coated with conductive adhesive on the inner surface of the connecting pipe, and the oxide film is destroyed by a wire brush.
(5) sharp corners and burrs on connecting pipes and conductor conductors, smoothing with files or sandpaper.
 
FAQ
Q: Are you trading company or manufacturer?
A: We are the factory. Also we can export the goods by ourselves.
Q: How long is your delivery time?
A: Generally we can send out the the goods within 3-7 days if the goods are in stock.
Or it is should be 7-30 days if the goods are not in stock, it is according to your order quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the samples for free charge but do not pay the cost of freight.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance,
balance before shipment.
Q: How about the after-sale service?
A: Any feedback or comments are welcomed.
We will try to make the best assistant to let you maximum satisfaction.